FIND YOUR SOLUTION

5 Results Found

Tool
Cordless

Extractor/Model
Corded
Corded/Cordless
Cordless

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Scheduled Self-Monitoring: If a control method is not listed on Table 1 and no objective data is available, OSHA requires employers implement a monitoring program to show that the employees have exposure levels below the PEL. The employer shall perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the exposures of employees on each shift, for each job classification, in each work area.

Tool

XDS01Z

18V LXT® Lithium-Ion Cordless Cut-Out Saw, Tool Only
Learn More
Attachment

INTEGRATED
Adapter

417765-1

Tool Cuff Adapter, 22mm for 1" hose (Included with XCV05ZX)
Learn More
Hose

Included
Extractor

XCV05ZX

36V (18V X2) LXT® Brushless Backpack Dust Extractor/Vacuum
Learn More

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Scheduled Self-Monitoring: If a control method is not listed on Table 1 and no objective data is available, OSHA requires employers implement a monitoring program to show that the employees have exposure levels below the PEL. The employer shall perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the exposures of employees on each shift, for each job classification, in each work area.

Tool

XDS01Z

18V LXT® Lithium-Ion Cordless Cut-Out Saw, Tool Only
Learn More
Attachment

INTEGRATED
Adapter

417765-1

Tool Cuff Adapter, 22mm for 1" hose (Included with XCV04Z)
Learn More
Hose

195433-3

Anti-Static Hose 1” x 11’ (Included with XCV04Z)
Learn More
Extractor

XCV04Z

36V (18V X2) LXT® 2.1 Gallon HEPA Filter Dry Dust Extractor/Vacuum
Learn More

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Scheduled Self-Monitoring: If a control method is not listed on Table 1 and no objective data is available, OSHA requires employers implement a monitoring program to show that the employees have exposure levels below the PEL. The employer shall perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the exposures of employees on each shift, for each job classification, in each work area.

Tool

XDS01Z

18V LXT® Lithium-Ion Cordless Cut-Out Saw, Tool Only
Learn More
Attachment

INTEGRATED
Adapter

417765-1

Tool Cuff Adapter, 22mm for 1" hose (Included with XCV13Z)
Learn More
Hose

195433-3

Anti-Static Hose 1” x 11’ (Included with XCV13Z)
Learn More
Extractor

XCV13Z

36V (18V X2) LXT® 4 Gallon HEPA Filter Dry Dust Extractor/Vacuum
Learn More

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Scheduled Self-Monitoring: If a control method is not listed on Table 1 and no objective data is available, OSHA requires employers implement a monitoring program to show that the employees have exposure levels below the PEL. The employer shall perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the exposures of employees on each shift, for each job classification, in each work area.

Tool

XDS01Z

18V LXT® Lithium-Ion Cordless Cut-Out Saw, Tool Only
Learn More
Attachment

INTEGRATED
Adapter

W107418678

Hose Cuff Adapter, 15/16" (Included with VC4210L)
Learn More
Hose

P-84084

1-1/4" x 13' Anti-Static Hose (Included with VC4210L)
Learn More
Extractor

VC4210L

11 Gallon Wet/Dry HEPA Filter Dust Extractor/Vacuum, AWS® Capable
Learn More

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Scheduled Self-Monitoring: If a control method is not listed on Table 1 and no objective data is available, OSHA requires employers implement a monitoring program to show that the employees have exposure levels below the PEL. The employer shall perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the exposures of employees on each shift, for each job classification, in each work area.

Tool

XDS01Z

18V LXT® Lithium-Ion Cordless Cut-Out Saw, Tool Only
Learn More
Attachment

INTEGRATED
Adapter

192108-A

3/4" x 10' Vacuum Hose
Learn More
Hose

Included
Extractor

VC4710

12 Gallon Xtract Vac™ Wet/Dry Dust Extractor/Vacuum
Learn More

For Dust Management solutions that are OSHA compliant under Option 2: Compliant under Option 2, Objective Data of the OSHA standard for Occupational Exposure to Respirable Crystalline Silica (rule 1926.1153) when dust extractor is operated with the tested tool model and operated under conditions tested by Makita®.

Note: To ensure performance, verify that any engineer controls (accessory-components used with the dust collector/vacuum such as dust shrouds, dust extraction attachments, connectors) are used per manufacturer instructions, and are securely attached to a compliant vacuum.

Makita Dust Extractors
Find the Makita^® dust extraction vacuum that works for you.

AWS^® AUTO-START WIRELESS SYSTEM
Discover the Convenience of Intelligent Communication

OSHA Compliance Rule 29 CFR 1926.1153
Find out how to get your Makita tools and equipment compliant.

MAKITA^® DUST MANAGEMENT PRODUCT SEARCH

Not sure which tools and accessories match up? Our dust management search tool can help.

FIND YOUR SOLUTION

5 Results Found

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Related Documents:

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Related Documents:

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Related Documents:

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Related Documents:

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Related Documents:

Makita Dust Extractors

AWS^® AUTO-START WIRELESS SYSTEM

OSHA Compliance Rule 29 CFR 1926.1153

MAKITA^® DUST MANAGEMENT PRODUCT SEARCH

FIND YOUR SOLUTION

5 Results Found

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Related Documents:

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Related Documents:

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Related Documents:

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Related Documents:

DRYWALL/DRYWALL CUTTING

Specified Exposure Control Methods: For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1.

Performance option: The employer shall assess the 8-hour Time-Weighted Average (TWA) exposure for each employee on the basis of any combination of air monitoring data or objective data sufficient to accurately characterize employee exposures to respirable crystalline silica.

Related Documents:

Makita Dust Extractors

AWS® AUTO-START WIRELESS SYSTEM

OSHA Compliance Rule 29 CFR 1926.1153

MAKITA® DUST MANAGEMENT PRODUCT SEARCH

AWS^® AUTO-START WIRELESS SYSTEM

MAKITA^® DUST MANAGEMENT PRODUCT SEARCH